Uniden CXA 15698 - Manual (Page 14)

3
Direct.wall.mounting
If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the
following:
• Avoid electrical cables, pipes, or other items behind the mounting location that could cause a
hazard when inserting screws into the wall.
• Try to mount your phone within five feet of a working phone jack to avoid excessive cord lengths.
• Make sure the wall material is capable of supporting the weight of the base and handset.
• Use #0 screws (minimum length of -3/8 inches) with anchoring devices suitable for the wall
material where the base unit will be placed.
) Insert two mounting screws into the wall (with their appropriate anchoring device), 3-5/6
inches apart. Allow about /8 of an inch between the wall and screw heads for mounting the
phone.
2) Refer to steps through 0 on page 2 to mount the telephone.