Uniden CXA 15698 - Manual (Page 11)

0
Connecting.the.Base.and.Corded.Handset
) Connect the corded handset curl cord to the left side of the phone
and to the corded handset.
2) Route the curl cord inside the molded wiring channel as shown.
3) Connect the AC adapter to the DC.IN.9V jack and to a standard
20V AC wall outlet.
CAUTION: To avoid risk of fire and shock, only use the
Uniden.AD-314.AC.adapter.
4) Route the AC adapter cord inside the molded wiring channel as
shown.
5) Connect the AC adapter to a continuous power supply (i.e., an
outlet that is not controlled by a switch).
6) Place the base unit close to the AC outlet to avoid long extension
cords.
7) Connect the telephone line cord to the TEL.LINE jack and to a
telephone outlet.
8) Set the base on a desk or tabletop. Place the corded base
handset in the base cradle.
Tip: If your telephone outlet isn’t modular, contact your
telephone.company.for.assistance.