Uniden CXA 15698 - Manual (Page 16)

5
Connecting.the.Cordless.Handset.and.Charger
The cordless handset is powered by a rechargeable battery pack. The battery recharges automatically when the
handset is placed in the charger.
) Connect the AC adapter to the DC.IN.9V jack and to a standard 20V AC wall outlet.
CAUTION:.Use.only.the.Uniden.AD-310.or.AD-1010.AC.adapter.
2) Set the charger on a desk or tabletop, and place the
handset in the charger with the keypad facing forward.
3) Make sure that the charge light illuminates. If the charge
light does not illuminate, check to see that the AC adapter
is plugged in and the handset makes good contact with
the charging contacts.
4) Charge the handset battery pack for at least 5-20 hours
before using your new cordless handset for the first time.
5) To test your connection, try making a call from the cordless handset. If your call does not connect, check to make
sure the battery is fully charged. If you see LOW BATTERY on the cordless handset display, check to make
sure the battery is properly connected. To check the battery, slide the battery compartment door open and check
the battery cables to ensure a tight and proper connection. If your handset still does not work, please contact
Uniden’s Customer Service department. Please see back cover for contact information.