Pabx connection travelling out-of-range – Uniden DG72 User Manual
Page 20
16
▼
From the Base Unit
For example, if your bank’s telephone number is stored in base unit memory
location
, and your account number is stored in handset memory
location :
1. Press
on the base unit.
2. Press
on the base unit and number
on the base unit
keypad.
3. At the appropriate time, press
and number
on the base unit
keypad.
4. Your base unit dials the number and you may proceed with your transaction.
As you begin to move too far from the base, you will first hear a clicking
sound. As you travel further, the noise increases. If you travel out-of-range,
your call terminates.
This telephone may work with a 2-wire Analogue PABX network. However, the
hook-flash timing fixed at 100msec, some PABX equipment that uses a different
hook flash timing may have its special feature (i.e. placing a call on hold or
transferring a call) inaccessible.
PABX CONNECTION
TRAVELLING OUT-OF-RANGE
4
0
mem
3
0
mem
speaker
4
0
3
0
!
Check with your PABX
supplier if you are not sure
whether your PABX network
uses Analogue or Digital
interface.