Uniden DG72 - Manual (Page 18)

14
2. At the base unit, press to answer the page. An intercom link is now established
between the handset and the base unit. Speak into the microphone.
3. Press on the base unit to establish communications between the calling party.
▼ Transferring a call from the Base Unit to the Handset
1. During a call, press on the base unit, the call is placed on hold automatically
and the handset is paged. (If there is no answer press again to return to the
call on hold).
2. At the handset, press to answer the page. An intercom link is now established
between base unit the and the handset. Speak into the microphone.
3. Press on the handset to establish communications.
▼ Entering Handset Memory Numbers
1. Remove the handset from the base.
2. Press . The talk LED blinks.
3. Enter the phone number, up to 16 digits.
If a pause is needed during dialing
to access long distance service, press
to insert a pause.
4. Press again.
5. Enter the two digit memory location - on the keypad. A tone
indicates that the number is stored.
▼ Entering Base Unit Memory Numbers
1. Press . The in use/hold/mute LED blinks.
2. Enter the phone number, up to 16 digits.
If a pause is needed during dialing
to access long distance service, press
to insert a pause.
3. Press again.
4. Enter the two digit memory location
- on the keypad. A tone
indicates that the number is stored.
0 2 1 0
mem
redial/p
charge
speaker
in use/hold/mute
power
flash redial/p
int mem hold mute
vol
inuse/hold/mute
redial/p
mem
mem
0 2 1 0
mem
redial/p
talk
mem redial/p
mem
STORING A PHONE NUMBER IN MEMORY
talk
int
int
int
speaker
int
!
The pause button count
as one digit. Pressing
more than
once increases the length
of pause between numbers.
redial/p