Hold, Call waiting – Uniden DG72 User Manual

Page 16

The

c.wait

procedure

toggles between the incoming
and original call (vice versa).
The

c.wait

procedure will

drop the current call and pick
up the incoming call or call
on hold.

▼

For Australian Version

Using the c.wait feature

Please call your local telephone service provider to check the availability of this
service in your area.

1. While talking you hear the Call Waiting signal.

2. Press

button.

3. The existing call is placed on hold.
4. Talk to the second caller.

5. Press

button to end the current call.

6. The phone will ring back indicating that

the first caller is still on hold.

7. Press

button to answer this call.

8. Press

button to end the call.

Using the Flash Key

To access Telstra’s Call Waiting Service, you can either use the

button or

the key.

1. While talking you hear the Call Waiting signal.

2. Press

then

to switch call and put the current call on hold.

3. To switch back to your original call, press

then

▼

For New Zealand Version

Using the c.wait or flash key

1. While talking you hear the Call Waiting beep signal.

2. Press

or the

key. This feature sends a 600ms timed

“hook-flash” on the telephone line for accessing services such as
Call Waiting etc.

To use the hold feature during a conversation,

press

. Both parties will not be able to hear.

To disable the hold feature, press

again.

hold

HOLD

flash

c.wait

flash

c.wait

talk

c.wait

flash

c.wait

CALL WAITING

The +

call

waiting procedure toggles
between the incoming and
original call (and visa
versa).

The +
procedure will drop the
current call connection and
pick up the incoming call
on hold.

flash

In New Zealand you must
subscribe to Telecom’s Call
Waiting Service before you
can use this feature.