Uniden DSC Series User Manual
Page 49
46
1.
Press SELECT at
BASE ID
, the
following screen appears.
2.
Press CH
▲ to increase the number, CH
▼ to decrease. The number will be
entered when SELECT is pressed, and
the blinking digit moves to the right. (You
can select the number 0000 to 9999.)
3.
Press and hold SELECT to enter the
last digit. The radio returns to the
BASE
ID
screen.
2-G-1. BASE ID
This number consist of 4 digits that you decide yourself. This feature
allows you to set the Base ID. To use the WHAM, you must set the
same Base ID for your OCEANUS DSC and WHAM, which enables
your OCEANUS DSC and WHAM to communicate with one another.