Uniden DSC Series - Manual (Page 41)

38
1. Press SELECT at the code that you
want to edit.
2. EDIT appears, then press SELECT.
3. You can now edit the FIPS code. Press
CH
▲ increase the number, CH ▼ to
decrease. The number will be entered
when SELECT is pressed, and the
blinking digit moves to the right.
2-C-2. EDIT
If you want to edit the FIPS code
1. Press SELECT at NEW . The registering
screen appears.
2. You can now enter the new FIPS code.
Press CH
▲ to increase the number,
CH
▲ to decrease. The number will be
entered when SELECT is pressed, and
the blinking digit moves to the right.
When you finish entering the last digit,
the radio returns to
NEW screen.
2-C-1. NEW
If you want to register a new FIPS code