Uniden BCD996T - Manual (Page 57)

57
Programming General Settings
Off — Press F to select.
Setting the Display Orientation
[MENU] Settings F
Set Upside-down F
This setting controls the orientation of the display. If you set Upside-down to On,
the scanner inverts the display text and graphics.
Adjusting the Display Contrast
There are 15 contrast levels. As you scroll from level 1 to 15 you see the contrast
change. Press the Scroll Control to lock the desired level until the time you desire
to change it.
[MENU] Settings F
Adjust Contrast F
Select a level Level 1 to Level 15 F
Setting the GPS Format
[MENU] Settings F
Set GPS Format F
These settings control how the scanner handles GPS input when you are using the
location-based functions.
Setting the Position Format
[MENU] Settings F
Set GPS Format F
Set Pos Format F
This setting controls the format used for entering GPS coordinates into the
scanner.
DMS: DDD° MM’ SS.ss — Enter the location in Degree, Minute, Second format.
DEG: DDD.dddddd — Enter the location in Degree and fraction format.