Uniden BCD996T - Manual (Page 106)

106
Unlocking All Frequencies
[MENU] Srch/CloCall Opt F
Freq Lockouts F
Unlock All F
The scanner prompts you to confirm the change in lockout status. To confirm the
change of all locked-out frequencies, press
F . If no frequencies are locked, you
see Nothing Locked Press Any Key. Otherwise, to cancel, press [MENU].
Reviewing Locked-Out Frequencies
[MENU] Srch/CloCall Opt F
Freq Lockouts F
Rvw Search L/O F
The scanner displays the first locked-out frequency and prompts you to unlock the
frequency. Press
F to unlock the frequency. Or, rotate the Scroll Control or press
to select a different frequency. If there are no frequencies to review, you see
Nothing Locked Press Any Key. Otherwise, to cancel, press [MENU] to
backstep.
Searching for Subaudible Tones
[MENU] Srch/CloCall Opt F
CTCSS/DCS Search F
On or Off F
This setting controls whether the scanner will search for a subaudible tone when it
stops on a transmission during search or Close Call operation.
On — The scanner searches for and displays any subaudible tone found.
Off — The scanner does not search for subaudible tones.
Note: This feature does not operate when the scanner is in AM/WFM/FMB
modulation mode.
Screening Out Broadcast Sources
[MENU] Srch/CloCall Opt F
Broadcast Screen F