Setting i-call (motorola and edacs systems only), Setting the end code operation (motorola, Setting i-call (motorola and edacs sys – Uniden BCD396T User Manual

Page 79: Setting the end code operation, Motorola systems only), Setting i-call, Motorola and edacs systems only)

Programming/Editing Optional Settings

Setting the End Code Operation

(Motorola Systems Only)

Program System

Select the system

Edit Sys Option

Set End Code

This setting determines how the scanner handles the
transmission end code sent by most Motorola sys-
tems. Select your setting then press E.

Yes - the scanner immediately returns to the control

channel when it detects the end code.

Ignore - the scanner does not return to the control

channel until the carrier drops.

Note: The default setting is Yes.

Setting I-Call

(Motorola and EDACS Systems Only)

Program System

Select the system

Edit Sys Option

Set I-Call

This setting determines how your scanner treats I-calls
while ID Searching.

On - the scanner tracks I-calls. Press E to select.
Off - the scanner ignores I-calls. Press E to select.
Only - the scanner only tracks I-calls and ignores

other radio traffic on the system. Press E to select.

Note: The default setting is Off.

Menu