Uniden BCD396T - Manual (Page 71)

71
Programming Radio Systems
• See “Setting the System Hold Time” on Page 76
• See “Editing the System Quick Key” on Page 75
• See “Setting the Channel Delay Time” on Page 76
• See “Setting ID Scan/Search (Trunked Systems
Only)” on Page 77
• See “Reviewing Locked Out Frequencies” on
Page 107
• See “Setting Channel Attenuation (Conventional
Channels Only)” on Page 90
• See “Deleting Systems” on Page 83
• See “Copying Systems” on Page 83
• See “Setting System Frequencies” on Page 71
• See “Entering/Editing LTR Channel Groups” on
Page 71
Setting System Frequencies
Program System
Select the system
Set Frequencies
New Frequency
Input a system frequency, then press the scroll control.
The scanner then prompts you to enter the LCN for
the entered frequency. Enter the LCN, then press the
scroll control.
To enter additional frequencies, press , use the
scroll control to select New Frequency, then repeat
the above.
Entering/Editing LTR Channel Groups
To enter channels in a system, first set up a channel
group (or groups) to hold the channels. Then, enter
the channel and channel parameters in the group(s).
Menu
Menu