Uniden BCD396T - Manual (Page 40)

40
Setting Up Your Scanner
ATT - appears when the attenuation feature is turned
on. See “Setting System Attenuation (Trunked Sys-
tems Only)” on Page 83.
PRI - appears when the priority feature is turned on
(see “Priority Scan” on Page 54).
- appears when you lock the keypad (see
“Locking/Unlocking the Keypad and Scroll” on
Page 53).
- alerts you when the battery power gets low.
GRP - shows the currently activated group or selected
group Quick Key number, appears with numbers (0-9).
The currently active group indicator flashes.
AM/FM/NFM/WFM - appears to show the type of
transmission.
L/O - appears when you manually select a channel
you locked out or a skip frequency.
- appears when you hold down to select a
function.
- appears when the scanner is set to a Close Call
feature mode (see “Using the Close Call Feature” on
Page 103).
SCAN - scrolls while the scanner is scanning.
DSKP - appears when data skip is turned on.
HOLD - appears while the scanner is set to scan or
search hold mode.
- appears if priority is turned on
ATT - appears if the attenuator is turned on.
SCR - appears when one or more broadcast screen
bands are turned on.
REP - appears when repeater find is turned on.
P25 - appears when an APCO P25 digital voice
transmission is being received.
- appears to show signal strength (0 to 5)
F
Func
P