Product dimensions, Door swing/clearances information, Other site requirements – U-Line 2175BEVOL2 User Manual
Page 5
03/2008
5
www.U-LineService.com
2175BEV/2175BEVOL2 Beverage Center
Product Dimensions
Please note that the unit has adjustable feet that can add
one additional inch to height during leveling or to match
adjacent cabinets (see Figure 26 on Page 14).
Door Swing/Clearances Information
Wood Overlay units have a zero clearance for the door to
open 90° (see Figure 3). Stainless Steel models require a
minimum of 2-1/8" door clearance to accommodate the
handle if the unit is installed next to a wall or similar type
of structure.
Other Site Requirements
Power Supply
The unit requires a grounded and polarized 115 VAC,
60 Hz, 15A circuit (normal household current). See
Electrical Specifications on Page 14.
Environmental Requirements
Many U-Line models are designed to operate in harsh
outdoor/marine environments. Special considerations
include the following:
• The units are designed to operate between 50°F (10°C)
and 110°F (40°C). High ambient temperatures (110°F
[40°C] or higher) may reduce the unit’s ability to reach
low temperatures.
• For best performance, keep the unit out of direct
sunlight and away from heat generating equipment.
• In climates where high humidity and dew points are
present, condensation may appear on outside surfaces.
This is considered normal. The condensation will
disappear when the humidity drops.
• U-Line does not recommend installation of glass front
models (Wine Captain
®
wine storage models and
Beverage Centers) as well as the Combo Drawer model
(Refrigerator/Freezer/Ice Maker) outdoors, or in tropical
climates where high humidity and dew point are present
on a regular basis, unless air-conditioning (typical 72°F,
75%RH) will be used.
Figure 2
25 - 3/8"
Including
Handle
34 - 1/8"
23 - 15/16"
23 - 1/4"
Including
Wood
Overlay
34 - 1/8"
23 - 15/16"
Stainless Steel
Wood Overlay
ULIN_0819_A
90
Door Swing
Wall
Wall
21"
25-1/2"
90
Door Swing
21"
25-1/2"
Stainless Steel
Wood Overlay
2-1/8" Min.
1/4" Min.
ULIN_0820_A
Figure 3