Uniden DECT 6015 - Manual (Page 19)

18
Name Tag
Name Tagging works with the caller display number from Caller ID. You will need to subscribe to the Caller ID feature
with your phone company for Name Tagging to work.
When the phone rings, the received caller display number is compared
to numbers stored in the phonebook. If there is a match then any name
stored with the phonebook number will be displayed. To change the Name
Tagging setting, follow the steps listed below.
1) Press [Menu/Select]. Select the GLOBAL SETUP menu, and
then the NAME TAG submenu.
2) Move the cursor to select ON or OFF.
3) Press [Menu/Select]. You will hear a confi rmation tone.
Insert 0
This feature adds “0” or “00” at the beginning of the number received from Caller ID. The default setting for New
Zealand is ON. The default setting for Australia is OFF. To change the Name Tagging setting, follow the steps listed
below.
1) Press [Menu/Select]. Select the GLOBAL SETUP menu, and
then the INSERT 0 submenu.
2) Move the cursor to select ON or OFF.
3) Press
[Menu/Select]. You will hear a confi rmation tone.
Insert 0
On
Off
DECT6015 OM.indb 18 DECT6015 OM.indb 18 8/8/07 4:10:30 PM 8/8/07 4:10:30 PM