Uniden DECT 6015 - Manual (Page 14)

13
Installing the Battery
Use only the Uniden BT-652 rechargeable battery pack supplied with your cordless telephone.
Follow the steps below to install the handset battery.
Press in on the handset battery case cover (use the fi nger 1)
indention for a better grip) and slide the cover downward
to remove.
Plug the battery cable into the battery jack. Be sure to 2)
match the red and black wires to the label near the jack.
The cable should snap into place. Gently pull on the
battery cable. If the battery connector comes loose, try
connecting again until the battery snaps into place.
Place the battery case cover back on the handset and 3)
slide it upwards until it clicks into place.
DECT6015 OM.indb 13 DECT6015 OM.indb 13 8/8/07 4:10:29 PM 8/8/07 4:10:29 PM