Installing the battery – Uniden 6035 + 1 User Manual

Page 14

Installing the Battery

Use only the Uniden BT-652 rechargeable battery pack supplied with your cordless telephone.
Follow the steps below to install the handset battery.

Press in on the handset battery case cover (use the fi nger

indention for a better grip) and slide the cover downward

to remove.

Plug the battery cable into the battery jack. Be sure to

match the red and black wires to the label near the jack.

The cable should snap into place. Gently pull on the

battery cable. If the battery connector comes loose, try

connecting again until the battery snaps into place.

Place the battery case cover back on the handset and

slide it upwards until it clicks into place.

DECT6035, 6035+1 OM.indb 13

8/8/07 3:25:40 PM