Uniden MHS550 - Manual (Page 36)

Uniden MHS550 Radio Owner’s Manual 34
AM band menu reference
Follow the steps below to open the AM radio band menu:
If the top of the display does not show AM Radio
Band, press the BAND-1/2.5/5W button repreatedly until
the display shows AM.
Wait for the display to show the AM band screen, then
press the MENU button.
Refer to the table below for the available options and
settings available in the AM band.
Menu
Option
Use It To...
Available Settings
(default setting is in
italics)
Lamp
Adjust
Change the operation of the
display backlight
Always On
Timer (see page 22)
Always Off
Contrast Adjust the display contrast
10 contrast levels
(default = 7)
Tuning
Steps
Set channel frequency steps
to the US standard (10 kHz) or
European standard (9 kHz)
9 kHz Steps
10 kHz Steps
Key
Beep
Turn the key touch and menu
confirmation tones on or off
On
Off
Exit Close the menu
Using the FM Band
The following features and
options are avilable only when
the radio is in the FM band. To
activate the FM band, press the
BAND-1/2.5/5W button
repreatedly until the display
shows FM.
1.
2.
3.
FM FM