Uniden BCT15 - Manual (Page 61)

61
Using the Menu
Display Format
The Menu screen uses 4 lines of text. The uppermost line is the heading for the
level with three choices below. For example, the display to set the modulation
looks like:
Editing a Name
There are many instances when you will want to custom name a new system, a
new site, a TGID and more.
For example, to edit a system name:
[MENU] Program System
F
Select the system
F
Edit Name
F
To enter a letter, turn the Scroll Control until the character you want appears. To
enter a decimal point, press [.No]. To move the cursor to the left, press [4]. To
move the cursor to the right, press [6].
To clear a character, press [.No] twice. To clear all characters, press [.No] 3 times.
To accept an entry, press [E
YES
] or
F .
Notes:
• If the name already exists in the same category, the scanner sounds a tone
and the display shows Name Exists and Accept? (Y/N). At that point you
select either [E
YES
] or [.No].
• In naming a Custom Search Range, you might leave the name blank. If you do,
the scanner asks Set Default Name OK? (Y/N). Use either [E
YES
] or
[.No] to make your choice.