Uniden BCT15 - Manual (Page 105)

105
Searching and Storing
In addition to this scan you can search any of the preprogrammed service or
custom search ranges.
While scanning, press
F .
Rotate the Scroll Control until you reach the desired
service or custom search range. Press [L/O] to unlock it. You can also assign a
System Quick Key to the search to make it easy to quickly enable/disable the
search range for search and scan. The Search with Scan Hold time determines
how long the scanner stays on a search before moving on. The default is 2
seconds. See Page 104 to change the Search with Scan settings.
Editing a Service Search
You can change the way service search works for each service. There are also two
methods to reach the point of editing.
Method One
[MENU] Search for ...
F
Edit Service
F
Select a service range:
Public Safety, News, HAM Radio, Marine, Railroad, Air, CB
Radio, FRS/GMRS, Racing, TV Broadcast, FM Broadcast, Military
Air, Special
F
Method Two
F
+ [SCAN/SEARCH]
Quick Search? Yes=”E” / No=”.”
Press [.No] then to Edit Service
F .
At this point you can edit each of the settings that comprise each service search
range.
The following show you how to set the various option settings associated with a
Service. For each, your starting operation is
[MENU] Search for ...
F
Edit Service
F
Select a service range:
Set Delay Time
to select a value from 1 sec, 2 sec, 3 sec, 4 sec,
5 sec, and Off.
F