Uniden PRO630XL - Manual (Page 22)

UNIDEN Model PRO630XL
22
VOX Operation (optional VOX headset required)
1. Press [MENU/ENTER] two times.
The VOX setting flashes.
2. Turn the Rotary Channel Selector at
the base to change the
VOX sensitivity (oF (OFF), 1
(highest) - 9 (lowest)).
3. Press [MENU/ENTER] to store the setting.
4. Press and hold [MENU/ENTER] to exit
from the menu mode.
5. Disconnect Standard Microphone and
connect the VOX headset.
• The VOX function works only when connected in place of the Standard Microphone.
The optional VOX Headset and Standard Microphone cannot be connected at the
same time.
• If a button is not pressed within 10 seconds the AM CB Radio will automatically exit
the Menu Mode.
Selecting the Call tone
1. Press [ MENU/ENTER] three times.
The call tone setting flashes.
2. Turn the Rotary Channel Selector
to change the setting between C1, C2,
C3, C4 and C5.
3. Press [MENU/ENTER] to store the setting.
4. Press and hold [MENU/ENTER] to exit
from the menu mode.
If a button is not pressed within 10 seconds the AM CB Radio will automatically exit
the Menu Mode.
Operation