Uniden PRO630XL - Manual (Page 12)

UNIDEN Model PRO630XL
12
Removing the PRO630XL from the DIN-E Sleeve
If you plan to use the Rear MIC Jack or connect an external speaker, at a later time, you should
plan to remove the PRO630XL from the DIN-E sleeve. This is easily done using the provided
Removal Keys.
Fully insert both Removal Keys straight into the slots on the left and the right edges of the radio’s
dress panel. You cannot remove the radio if only one key is available.
Press in fully and the radio will unlock from the sleeve making withdrawal from the sleeve
possible. Store the keys in a safe place for future use.
DIN-E Installation