Operation, Priority watch – Uniden PRO630XL User Manual
Page 21
UNIDEN Model PRO630XL
21
Priority Watch
To switch Priority Watch On/Off;
1. Press
[MENU/ENTER]
one time. The Priority Watch setting flashes.
2. Turn the Rotary Channel Selector at the base to change the setting between ON or OFF.
3. Press
[MENU/ENTER]
to store the setting.
4. Press and hold
[MENU/ENTER]
to exit from the menu mode.
If SCAN is deactivated while it is tuned to an active channel, the AM CB Radio will stay
on that active channel.
If none of the channels are active, the AM CB Radio will reinstate the scan start
channel.
If OS/GS Scanning is initiated when there are no channels programmed in
OS/GS memory, an error tone will be heard and scanning will not start (see
Programming Scan Channels - below).
Add/Remove Channels from SCAN Memory
Select which Scanning Mode you wish to use
OS or GS.
Select the channel you want to store.
Press to
[MEM]
store. M icon appears
and a short tone beep is heard.
To remove the channel from SCAN memory,
press
[MEM]
once more.
The M icon disappears.
Operation