Uniden 9035 - Manual (Page 57)

55 56
Troubleshooting The phone will ask you to confirm the deregistration. Select YES. The selected handset will clear its registration
information only from the base it is currently connected to, and then delete the link to the base from its own
memory.
When the base information is deleted, the handset displays HANDSET NOT REGISTERED-PLACE HANDSET
ON BASE TO REGISTER. SEE YOUR OWNER'S MANUAL FOR HELP.
Re-register the handset to the base (see Registering Accessory Handsets on page 2).
If the handset cannot contact the base, it will display OUT OF RANGE. Make sure the handset is in range of the
base and the base is connected to power; you can also reset the handset without the base (see the next section).
Resetting the Handset Without the Base
If your original base is not available for some reason, you can still reset the handset and use it with another base.
Press and hold [ ] and [#] for at least five seconds.
Move the cursor to select BASE UNAVAILABLE and then press [Select/menu].
Select the base which you want to de-register from, and then press [Select/menu]. BASE UNAVAILABLE
appears.
Move the cursor to select YES, and then press [Select/menu]. You hear a confirmation tone, and the
handset deletes its own base information without contacting the base. The handset displays HANDSET NOT
REGISTERED-PLACE HANDSET ON BASE TO REGISTER. SEE YOUR OWNER'S MANUAL FOR HELP.
Register the handset to the new base (see Registering Accessory Handsets on page 2).
4.
5.
6.
.
2.
3.
4.
5.
DECT ELITE OM.indb 56 13/3/08 3:21:41 PM