Uniden UM-525 - Manual (Page 38)

38
4. Repeat Step 3 for each of the channel name’s characters. When you have entered all of the
channel name’s characters, hold down PUSH/SELECT. When you have entered all of the
channel name’s characters, a confirmation screen appears.
5. If the channel name you set appears correctly, rotate PUSH/SELECT to select YES. The radio
saves the channel name you input. Otherwise, rotate PUSH/SELECT to select NO .
Setting a Channel Name to its Default Name
1. Rotate PUSH/SELECT to select the channel name you want to edit, then press PUSH/
SELECT to select it. A screen appears where you can select what action you want to take.
2. Rotate PUSH/SELECT to select DEFAULT , then press PUSH/SELECT to select it.
A confirmation screen appears.
3. If the channel name appears correctly, rotate PUSH/SELECT to select YES. The radio saves
the channel name. Otherwise, rotate PUSH/SELECT to select NO .
Setting FIPS Codes
This option lets you add FIPS codes that activate the radio’s SAME weather alert system. You
can program up to 30 FIPS codes into the radio.
Rotate PUSH/SELECT to select FIPS , then press PUSH/SELECT to select it. FIPS and a list
of the current FIPS codes appears.
To enter a new FIPS code, see “Entering a New FIPS Code”. To edit a FIPS code, see
“Editing a FIPS Code”. To delete a FIPS code, see “Deleting a FIPS Code”.
Entering a New FIPS Code
1. Rotate PUSH/SELECT to select NEW , then press PUSH/SELECT to select it. The cursor
moves to the first character of the FIPS code.
2. Rotate PUSH/SELECT clockwise to move forward through the displayed numbers or
counterclockwise to move backward. When the number you want appears, press PUSH/
SELECT to select it. The cursor moves to the next number.
3. Repeat Step 2 for each of the FIPS code’s characters. When you have entered all of the
FIPS code’s numbers, hold down PUSH/SELECT. A confirmation screen appears.
4. If the FIPS code you set appears correctly, rotate PUSH/SELECT to select YES. The radio
saves the FIPS code you input. Otherwise, rotate PUSH/SELECT to select NO .
Editing a FIPS Code
1. Rotate PUSH/SELECT to select the FIPS code you want to edit, then press PUSH/SELECT to
select it. A screen appears that lets you select your desired action.
2. Rotate PUSH/SELECT to select EDIT , then press PUSH/SELECT to select it. The cursor
moves to the first character of the FIPS code.
3. Rotate PUSH/SELECT clockwise to move forward through the displayed numbers or
counterclockwise to move backward. When the number you want appears, press PUSH/
SELECT to select it. The cursor moves to the next number.
Using the Setup Screen