Uniden UM-525 - Manual (Page 35)

35
Setting the Vessel Type
This option lets you select whether your vessel is a motor vessel, sailing vessel, or tow boat.
This lets you select the correct fog horn settings for your particular vessel.
1. Rotate PUSH/SELECT to select VESSEL TYPE , then press PUSH/SELECT to select it.
2. Rotate PUSH/SELECT to select POWER BOAT or SAIL BOAT or TOW BOAT . When you
have made the selection you want, press PUSH/SELECT to select it.
Setting the Fog Horn Frequency
This option lets you adjust the frequency of the fog horn that sounds when the fog horn mode
is set to
MANUAL , UNDERWAY , STOP , SAIL , or UNDERTOW . You can set the frequency
between 200 Hz and 850 Hz in 50 Hz increments.
1. Rotate PUSH/SELECT to select FREQUENCY , then press PUSH/SELECT to choose it.
A screen showing the fog horn frequency levels appears.
2. Rotate PUSH/SELECT clockwise to increase the frequency or counterclockwise to
decrease it. When you have set the desired frequency, press PUSH/SELECT to enable it.
A confirmation screen appears.
Adjusting the Backlight
1. Rotate PUSH/SELECT to select BACKLIGHT , then press PUSH/SELECT to enable it.
A screen showing the brightness levels appears.
2. Rotate PUSH/SELECT to select the brightness level you want. When you have set the
desired brightness level, press PUSH/SELECT to enable it.
Adjusting the Key Beep
1. Rotate PUSH/SELECT to select KEYBEEP LEVEL , then press PUSH/SELECT to select
it.
A screen showing the key beep volume level appears.
2. Rotate PUSH/SELECT clockwise to increase the volume or counterclockwise to decrease
the volume. When you have set the desired volume level, press PUSH/SELECT to enable
it.
Adjusting the Color Pallet
This option lets you adjust the display so it displays the best combination of colors
for either day or night use.
Rotate PUSH/SELECT to select AUTO , DAY COLOR , or NIGHT COLOR . When you have set
the desired color pallet option, press PUSH/SELECT to enable it. In AUTO the screen dims in
a short period of time as well as changing its color pallet.
Using the Setup Screen