Uniden DECT160 User Manual
Page 45
[44]
Handset is not charging properly
• Check that the charge light is on and that the
handset is sitting correctly in the base or
charger. Clean the charging contacts with a dry
cloth.
• Are you using the power adaptor supplied with
your phone?
Handset will not link up with the base
• Is the
symbol flashing?
− if so, move closer
to the base as you are out of range.
• Is the handset registered to the base?
− see
page 27.
• Buzzing noise on my radio, TV, computer
or hearing aid. Sometimes your phone may
interfere with other electrical equipment if it
is placed too close. We recommend you
leave a distance of at least one foot to
avoid this.
Cannot make a call
• Is the Call Barring set?
− see page 25.
• Is the prefix dial set?
− see page 24.
CALLER ID
Caller’s details are not displayed
• Have you subscribed to a CALLER ID service?
If not, contact your local telephone service
provider.
• The caller may have withheld their details.
• Let the phone ring a couple of times as
there may be a delay in receiving the
CALLER ID information.
TELEPHONE ANSWERING MACHINE
(DECT180 series only)
Not answering calls
• Check that answering machine is turned on,
see page 39.
UC504DH(DECT160-2) OM 9/7/06 5:50 PM Page 44