Uniden DECT160 - Manual (Page 33)

[32]
Network services
TO USE CALLER ID OR ANY OTHER SERVICES
DETAILED IN THIS SECTION, YOU MUST FIRST
CONTACT YOUR LOCAL TELEPHONE
COMPANY AND SUBSCRIBE TO THE
RELEVANT SERVICE.
Caller ID
With CALLER ID, the caller’s name, if available, is
shown in the handset display as you receive an
incoming call so you can see who is calling before
you pick up the phone.
Only the first 14 letters of the caller’s name are
displayed.
Call Waiting Tone
This model has a special call waiting tone in
addition to the one you typically hear from your
local service provider. This tone will be heard after
the standard tone when you receive a call waiting
notification. This tone is provided as an extra
feature and will have to be turned on in order to
activate as the default setting is set to OFF. To
turn this feature on, go to the menu, select audio
setting, tones, and call waiting - then set the
feature to ON.
NOTE: If this feature is set to OFF, you WILL still
receive call waiting notifications IF you
have subscribed to call waiting features
from your local service provider.
Calls log
The calls log stores details of the last 30 incoming
calls.
It can store numbers up to 24 digits long and
names up to 13 characters long. When you have
new calls the number of message appears in the
display.
If the caller has withheld their listing,
Unavailable or Private will be displayed or,
if the number is unavailable the display will show
Unavailable . You will not be able to dial back an
entry with one of these messages.
When the calls log is full, a new call will replace
the oldest call.
UC504DH(DECT160-2) OM 9/7/06 5:50 PM Page 32