Uniden DECT160 - Manual (Page 26)

Seven-Digit Dialing
You can program your local area code into your
handset. If you get a call from within your area
code, you'll only see the 7-digit phone number. If
you get a call from outside your area code, you'll
see all 10 digits.
1 To enter an area code, press to access
the main menu.
2 Press or until Base Settings is
displayed and press .
3 Press or to display Additional and
press .
4 Press or to select Area Code and
press .
5 Enter the number of your area code using the
number keypad and press .
6 Press to exit and return to standby.
Call barring
When switched on, Call Barring prevents calls
from being made to a specific number, area code
or international code.
1 Press to access the main menu.
2 Press or to select Base Settings .
Press .
3 Press or to select Call Barring .
Press .
4 Enter the number using the number keypad
or . Press .
5 Press or to select On or Off .
Press to confirm.
6 Press to exit and return to standby.
[25]
UC504DH(DECT160-2) OM 9/7/06 5:49 PM Page 25