Uniden DECT160 - Manual (Page 36)

Using extra handsets
If you purchased a multi-pack all your handsets
come pre-registered to the base.
You can use a total of 6 handsets with your base.
Your handset can only be used with one base at
any time during a call.
To register a handset to your base, see page 27.
To de-register a handset from your base, see
page 28.
If you already have 6 handsets registered to your
base and you want to register a new handset, you
will first need to de-register one of your existing
handsets, see ‘De-register a handset or a base’,
page 28.
With more than one handset you can make
internal or intercom calls, transfer calls and hold
conference calls.
Room Monitor
This feature allows you to monitor sounds in
another room. For instance, you can use this
feature and 2 handsets as a baby monitor.
First, you will need to setup 2 handsets for room
monitoring.
Using Room Monitor
1 Press
on the handset.
2 Press or to select Room Monitor .
Press .
3 Press or to select the original handset
to monitor.
Press
. The handset to monitor will ring.
4 On the monitored handset, press .
Room monitor will start.
Place the handset you selected to monitor in the
room you wish to monitor, it will function as a
microphone.
The second handset will be used as a remote
speaker, allowing you to monitor sounds in the
room.
[35]
UC504DH(DECT160-2) OM 9/7/06 5:50 PM Page 35