Universal Remote Control (URS) KP-4000 - Manual (Page 4)

Page 1
KP-4000 N
ETWORK
K
EYPAD
Introduction
The KP-4000 is a Network Keypad with the ability to control audio
video components, energy management devices, multizone matrixes,
PCs, iPods, and whole house URC Lighting. MAC addressing enables
the use of multiple KP-4000’s and multiple MRX-1’s to control as
many components as needed throughout the house.
3. Self-adhesive “Flashers” affix to
the Infrared sensors on the front
panels of your client’s compo-
nents. The Flashers relay com-
mands to components. The flash-
ers plug in to the MRX-1 rear
flasher line outputs via their 10
foot cables. The MRX-1can also
connect to components with rear
panel IR Inputs via its adjustable
IR Line Outputs.
IR Controlled Device
MRX-1 Network Base Station
Router
PoE Injector
1. The KP-4000 communicates over the LAN (Local Area Network)
to IP controlled components and the URC MRX-1 Network Base
Station.
2. The MRX-1 receives com-
mands and controls the com-
ponents via IR or Serial.