Additional – Uniden EXS 2010 User Manual

Page 22

Text mode
Original mode

To attach the beltclip

Insert the beltclip into the holes
on each side of the handset.
Press down until it clicks.

To remove the beltclip

Pull both sides of the beltclip to
release the tabs from the holes.

Your phone may be used with
an optional headset, the Uniden
HS910. To use this feature, simply
plug the headset plug into the
headset jack. Your phone is ready
for hands-free conversation.

headset

jack

Installing the beltclip

Headset installation

ADDITIONAL

INFORMA

TION

If you have wall mounted
the base, you must remove
the beltclip to charge the
handset facing forward.

EXS 2010 6/28/00 4:12 PM Page 24