Programming the remote, A. quick set-up – Universal Remote Control (URS) SL-7000 User Manual

Page 6

Programming the Remote

A. Quick Set-Up:

Step 1:

Turn on the device (TV, VCR,CABLE BOX, SATELLITE RECEIVER,etc .)

you wish to operate.

Step 2:

On the remote control, press the corresponding

DEVICE

button

(TV, VCR, CATV

SAT, etc.)

and

MUTE

button simultaneously.

Note: SET will appear in the LCD.

Step 3:

Point the remote control toward the device. Punch in the first three digit

code number assigned to your brand from the brand code lists located on

pp.(

15 30

).The device will turn off when the correct code has been selected.

Step 4:

Once the device turns off, press the corresponding DEVICE button again

to store the code.

Note: LCD will flash PASS indicating that the code has been

stored.

Step 5:

Test the remote control functions with the code that was just stored.

If any of the buttons do not perform as they should, please repeat from
Step 2 using the next three digit code number for your brand of equipment.