Uniden BC 235XLT - Manual (Page 30)

Weather Scan
Your BC60XLT-1 is designed to scan 7 programmed
NOAA frequencies, so you easily find your local NOAA
weather broadcast.
Note: It is not advisable to program a weather frequency
into one of the 30 channels since weather
channels transmit continuously. The scanner will
remain on the weather channel, disrupting the
scanning cycle.
1. Press
W
to activate
the Weather scan.
Note: Be sure
SQUELCH
is set
properly.
2. When the Weather
Scan finds an active
weather channel, it
stops.
3. Press
W
again to
find the next active
weather channel.
Note: In some parts of the country, you may not be able
to monitor weather broadcasts, such as in
low-lying areas. Normally, a higher location or a
better antenna improves reception.
4. To exit Weather
Scan, press
M
,
S
, or
R
.
30