Uniden BC 235XLT - Manual (Page 23)

Chain Search
Use Chain Search to find active frequencies in your area.
You can search up to all five personal bands or turn off
those bands you don’t want to hear. This gives you
flexibility of searching for any channel between 29 and 512
MHz, as long as they are within the 10 frequencies bands
covered by the
BC60XLT-1 . See the table on page 3, the
Technical Specifications on page 34, or the table on the
back of the
BC60XLT-1 .
Setting a Search Range
An error message
displays when
R
is
pressed and you
have not either
specified a search
range in at least one
Chain Search band
—OR—
If you attempt to turn
off all Personal Chain
Search bands.
The Error message
turns off automatically
and Chain 1 is
selected when all
search locations are
empty. Press
M
to return to normal
scan, or press
s
to
select the band you
want to program.
23