Uniden BC 235XLT - Manual (Page 27)

Channel Skip
If a particular channel continues to interrupt search
scanning, it is possible to set your scanner to skip the
frequency.
If your scanner stops
while searching,
press
N
to lockout
the frequency from
the search range.
Note: You can
program 10 skip
frequencies. The 11th
skip frequency
entered causes the
1st skip frequency to
unlock.
To unlock all skip frequencies at once, follow these steps:
1. Press either
U
or
D
during a search.
Note: You must be in
Search Hold before
restoring all skipped
frequencies.
2. Press and hold
N
for about two seconds.
You will hear two
beeps when all the
channels have been
restored.
Storing Search Frequencies
You can quickly store any frequency you find during
Search.
Caution: You must select the channel in which you will
store the frequency before entering the search
mode. Otherwise, you may erase a stored
frequency that you want to keep.
27