Uniden BC 235XLT - Manual (Page 25)

Note: The display
alternates between
the upper and lower
ranges. If you
program the wrong
limit, press
0
and
E
, then press
0
and
E
again to
erase the error and
reset the limits to
zero. Then begin
again.
4. Either press
R
to
begin your search.
Note: Your scanner searches each selected
Personal Chain Search band. The display flashes
the number of the band while it’s scanned. Other
bands which are programmed and selected are
displayed but do not flash.
—OR—
Press
s
to move to
the next chain
location.
Note: You can press the Chain Search band
number, followed by
s
, to access the location
directly.
25