Uniden DCT5260 - Manual (Page 55)

A D D I T I O N A L I N F O R M AT I O N [ 53 ]
General Information
The phone complies with FCC Parts 15 and 68. Operating temperature: 0 ºC to +50 ºC (+32 ºF to +122 ºF)
AC Adapter Information
AC Adapter part number:
AD-800 for the base AD-310 for the charger (DCT5260-2 only)
Input Voltage: 120V AC 60Hz 120V AC 60Hz
Output Voltage: 9V DC 350 mA 9V DC 210 mA
Battery Information
Battery part number:
BT-211AR
Capacity: 1500 mAh, 1.2V
Battery use time (per charge) from fully charged:
Talk mode duration (normal or DirectLink mode)
Up to 7 hours (up to 5 hours when the Clarity Booster is On.)
Standby mode duration Up to 14 days (up to 24 hours in DirectLink mode)
Recharge your phone on a regular basis by returning the handset to the cradle after each phone call. When
the operating time becomes short, even after the batteries are recharged, please replace the batteries.
A replacement Uniden adapter may be purchase at your local Uniden dealer or by contacting the Uniden Parts
Department (800) 554-3988. Hours are from 8:00 a.m. to 5:00 p.m. CST, Monday through Friday. We can also
be reached on the web at www.uniden.com.
For replacement batteries, use only “AA” rechargeable Ni-MH batteries. Do Not use Alkaline, Lithium, or non-
rechargeable batteries. To insure maximum performance and safety, replacement batteries specifically matched
for this phone, contact www.uniden.com. Using incorrect batteries could damage or limit the performance and
could cause bodily injury.
Specifications, features, and availability of optional accessories are all subject to change without prior notice.
If the handset is left off of the cradle, the actual Talk mode duration will be reduced
respective to the amount of time the handset is off the cradle.
ADDITIONAL
INFORMA
TION
DCT5260-2_UP301BH UP01301BZ_1 1/16/03 10:04 AM Page 53