Find handset, Flash and call waiting – Uniden DCT5260 User Manual
Page 33
BASICS
[ 31 ]
B A S I C S
Find Handset
To locate the handset, press find handset on the base
when the base is in the standby mode. All registered
handset(s) beeps for 60 seconds, and “Paging” appears
on the handset display.
Paging is canceled when pressing any key on the handset
or find handset on the base. Additionally, if you receive
an outside/intercom call or intercom, page is canceled.
Flash and Call Waiting
If you have Call Waiting service and a call waiting tone
sounds while you are on a call, press talk/flash to
accept the waiting call. There is a short pause, then you
will hear the new caller. To return to the original caller,
press talk/flash again.
• If the handset
batteries are
completely drained,
the handset will not
beep when paging.
• You must subscribe
through your local
telephone company
to receive Call
Waiting Service.
DCT5260-2_UP301BH UP01301BZ_1 1/16/03 10:04 AM Page 31