Uniden DCT5260 - Manual (Page 21)

G E T T I N G S TA R T E D [ 19 ]
Global Setup
If you change the setting in one of the handsets, you change the settings for all
handset(s) in the Global Setup menu. Only one handset can change a setting at a time.
GETTING ST
ARTED
Submenu name Description
AutoTalk Allows you to answer the phone without pressing talk/flash or speaker .
When the AutoTalk is set to On, simply remove the handset from the cradle
and the phone automatically answers the call (see page 22).
Anykey Answer Allows you to answer the phone without pressing talk/flash or speaker .
When the Anykey Answer is On, you can answer a call by pressing any number
key,
/tone/ t , or #/ s on the handset (see page 23).
Banner Customize the name of your handset, and display it in the LCD in the standby
mode. For example, you can name the handset “John” (see page 23).
Language Language option can be used to choose the language of your display.
You can select from English, French, or Spanish (see page 23).
Contrast Adjust the handset LCD brightness for better viewing (10 levels) (see page 23).
Submenu name Description
Day & time Set the day and time of your display (see page 24).
CIDCW Set the Caller ID on Call Waiting (CIDCW) setting. CIDCW performs the same as
regular Caller ID on call waiting number (see page 24). CW Deluxe allows you to
handle call waiting calls in seven different ways (see page 45).
Area Code Store or edit the area code. If you enter a 3-digit area code number in the
“Area Code” option, your local area code does not appear in the Caller ID
message. For calls received from outside your local area code, you will see a
full 10-digit number (see page 24).
Note: If your calling area requires 10-digit dialing, do not program this option.
Dial Mode Set the dial mode to tone or pulse (see page 24).
Make sure the line is
not in use, and the
handsets are within
the range limits of
the base.
DCT5260-2_UP301BH UP01301BZ_1 1/16/03 10:04 AM Page 19