Universal Electronics Titan M2056-C - Manual (Page 17)

www.urcsupport.com
17
Unlocking Channel Control
To unlock Channel Lock and thus allow the channel
control functions to work with the device associated to
the active operating mode, follow these steps:
Now the channel functions correspond to the active
mode (e.g., press CH+ in TV mode and the TV changes
channel accordingly).
PROGRAMMING MACRO KEYS
The Titan Remote Control includes two macro keys (F1
and F2, located directly below the INPUT key at the
bottom of the remote). Macros allow you to record a
series of key-presses and have the whole series of
functions execute each time the related Macro key is
pressed. For example, you can set up a key macro to
power on your TV and DVD player, change inputs on the
TV, and go to the main menu on the DVD player all with
the touch of one macro key. Quite often, your service
provider will assign macros to these keys and will
provide tune-in labels that describe the assigned key
function.
If you want to change the macros stored in a previously-
programmed macro key, you'll need to clear the key first
(See “Clearing a Macro Key” on page 18.).
1. Press and hold SETUP until the mode LED
blinks twice.
2. Enter 9 7 3. The mode LED blinks twice.
3. Press CH- once. The mode LED blinks four
times.
SETUP
Titan OCAP Remote Control.fm Page 17 Tuesday, May 27, 2008 1:55 PM