Univex PowerLite 700 - Manual (Page 90)

90 Solving Problems
3. Adjust the Sync setting to increase the image sharpness.
The image is too light or dark, or colors are incorrect.
■ Press the Color Mode button or select a different Color Mode
option in the Image menu. See page 43 for details on the available
options.
■ If you’re displaying video, adjust the Color Adjustment and
Color Mode settings on the Image menu. You can also try
adjusting the Color Saturation , Color Temp , and Tint settings
on the Image menu.
■ Try adjusting the Brightness and Contrast settings on the Image
menu.
■ Try adjusting the Brightness Control setting (see page 61).
■ Check your computer display settings to correct the color balance.
■ The projector’s lamp may need to be replaced. See page 74 for
instructions.
■ Make sure the correct input signal is selected in the Signal menu
(see page 60).
■ Make sure that all cables are connected to the proper ports and
connected securely.
There is no sound, or the sound is not loud enough.
■ Use the Volume buttons to adjust the volume (see page 48), or
adjust the Volume setting in the Settings menu.
■ Make sure A/V Mute is not enabled. (Press the A/V Mute button
to disable it.)
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your notebook or computer
monitor.