Univex PowerLite 700 - Manual (Page 73)

Maintaining the Projector 73
You can remove the air filter to clean both sides
If the filter is too dirty or broken, replace the filter as described below.
Replacing the Air Filter
You need to replace the air filter if:
■ You cannot remove the dust from it
■ The air filter is damaged or torn
■ You repeatedly see a projected message telling you to clean or
replace it
Contact your dealer or call Epson at 800-GO-EPSON
(800-463-7766) to obtain a new air filter. Request part number
V13H134A13.
1. Turn off the projector and unplug the power cord.
2. Slide the air filter out of its slot as shown.
3. Slide the new air filter into the slot until it clicks into place.
note
Air filters contain
polycarbonate, ABS resin,
and polyurethane foam.
Dispose of used air filters
according to local
regulations.