Selecting an image source, Adjusting the image, Selecting an image source adjusting the image – Univex PowerLite 700 User Manual

Page 40

Displaying and Adjusting the Image

Selecting an Image Source

You may need to select the image source if you have multiple image
sources connected to the projector (such as a computer or DVD
player). Selecting the image source lets you switch between images
input from different pieces of connected equipment.

If you don’t see the image you want, press the

button or one

of the

Source

buttons on the remote control, or press the

Source

button on the projector.

If you still can’t see an image or can’t project the same image that is on
your notebook or computer screen, see page 85 for solutions.

You can also select

Slideshow

to project from a USB device or

SD card. See page 50 for instructions.

Adjusting the Image

Once you see your image, you may need to make certain adjustments:

■

If the image is too high or too low, reposition it as described on
page 41.

■

If the image isn’t square, see page 41.

■

To focus or zoom your image, see page 42.

■

To quickly adjust the color mode, see page 43.

■

To change the image size (aspect ratio), see page 44.

■

If you need to fine-tune the image and/or sound, see
“Fine-Tuning the Projector” on page 55.

Source
Search
button

Search
button

Source
buttons