U-Line ICE-MAKER/REFRIGERATOR - Manual (Page 15)

11. Fasten upper hinge to unit (3
screws). Partially tighten
screws until door is aligned.
See Figure 21.
9. Remove three plastic plugs
in hinge holes, top of cabinet,
opposite side. Be careful not
to scratch cabinet (see
Figure 20).
10. Place door on lower hinge
pin. Invert and install upper
hinge on door.
8. Remove pivot screw from top hinge, invert screw and reinstall
pivot screw in top hinge. See Figure 19.
Figure 19
HINGE
RIGHT SIDE
DOOR SWING
LEFT SIDE
DOOR SWING
RIGHT SIDE
HINGE
INVERT
SCREW
INVERT
HINGE
SCREW
UL115
13
UL114
UL119
Figure 20
Figure 21