Uniden EXa15580 - Manual (Page 37)

SETTING UP
YOUR
ANSWERING SYSTEM
S E T T I N G U P Y O U R A N S W E R I N G S Y S T E M [ 37 ] www.uniden.com
Although you have set
the base ringer to off,
the handset will still
ring.
Choosing between the two outgoing messages
With the phone in standby mode, press the greeting key to play the current outgoing
message. While the outgoing message is playing, press the greeting key again to
switch between the prerecorded greeting and the personal greeting. After the
message finishes playing, a confirmation tone is heard.
Setting the Base Ringer Volume
The base has three ringer volume settings: high, low, and off. You can change the
ringer volume while in standby mode or while an incoming call is ringing.
1) Press the ringer key.
You hear the ringer at the current volume level
([
] High, [ ] Low, [ ] off) (if you set the
base ringer volume to off, “Ringer off” is
announced) and it is displayed on the base.
2) Press the ringer key repeatedly until the desired ringer
option appears.
3) The system displays the new ringer volume.
To delete the personal greeting, press the key during the announcement and the system
announces “Greeting has been deleted.”