Uniden XS1455/1455+1 - Manual (Page 13)

2
Direct.wall.mounting
If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before
doing this, consider the following:
Avoid electrical cables, pipes, or other items behind the mounting location that could cause
a hazard when inserting screws into the wall.
Try to mount your phone within .5m of a working phone jack to avoid excessive cord
lengths.
Make sure the wall material is capable of supporting the weight of the base and handset.
Use #0 screws (minimum length of 35mm) with anchoring devices suitable for the wall
material where the base unit will be placed.
) Insert two mounting screws into the wall (with their appropriate anchoring device), 00mm
apart. Allow about 3mm between the wall and screw heads for mounting the phone.
2) Refer to steps through 7 on page to mount the telephone.
35mm
100mm
3mm
35mm
100mm
3mm
XS1455+1 OM.indd 12 24/6/08 1:36:04 PM