Charging the handset(s) – Uniden 2315 User Manual

Page 5

[ iv ]

Charging the handset(s)

1) Place the handset(s) in the main base unit or charging

cradle with the keypad facing forward.

2) Make sure the charge LED illuminates. If the LED does not illuminate, check to see

that the AC adapter is plugged in and that the handset makes good contact with the
base charging contacts.

• After installing the batteries in the handset, charge your handset at least 15-20 hours.

During a power cut
or if the AC adapter
is switched off,
this telephone
will not operate.

Recharge your phone
on a regular basis by
returning the handset
to the base after
each phone call.

UP334BH (WDECT2315) ENG OM 12/28/04 8:54 AM Page iv