Installing the battery pack – Uniden 2315 User Manual

Page 4

[ iii ]

Installing the battery pack

1) Press down on the battery cover release and slide the

cover down until it comes off.

2) Connect the battery plug to the socket at the rear of the

battery compartment. The RED and BLACK battery wires
must match the RED and BLACK dots on the phone case for
the plug to fit properly. Press firmly until it clicks
into place.

3) Securely close the battery compartment cover by sliding it

up until it snaps into place.

Red

Wire

Black

Wire

3) Set the base on a desk or tabletop.

Connecting the charger - WDECT2315+1 only
1) Connect the AC adapter into the charging cradle

and to a AC wall outlet.

2) Set the charger on a desk or tabletop.

• Charge the handset

battery pack for at
least 15-20 hours
before using your
new cordless
telephone for the
first time.

• Use only the Uniden

rechargeable battery
pack (BT-446)
supplied with your
cordless telephone.

UP334BH (WDECT2315) ENG OM 12/28/04 8:54 AM Page iii