Universal Remote Control (URS) MX-6000 - Manual (Page 13)

Page 13
MX-6000 T
WO
W
AY
T
OUCH
S
CREEN
Pickup Settings
You can set your MX-6000 to only
turn on when touched, or every
time you move it.
Simply select on or off.
Network
WARNING! Only use this button when instructed to by Technical
Support. The Network screen displays network information about
your MX6000 and the wireless network it is connected to. Do not
make any changes on this screen!
Calibration
If you like, you can calibrate where you tap by running the calibra-
tion. You will need a pen top or PDA stylus to do this. Do not
attempt to calibrate using your fingers.
Factory Default
WARNING! Only use this button when instructed to by Technical
Support. It resets the memory of the MX-6000 to the factory condi-
tion. All your programming will be lost!
Exit
When you have finished adjusting
Settings, simply tap the EXIT but-
ton to return to normal operation.
OCE-0026G(MX-6000)_REV04.QXD 2/22/11 10:17 AM Page 13